Aluminium Windows Malaysia
Shaanxi SGL Doors&Windows Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of aluminium windows malaysia in China, also supports customized service. Please feel free to wholesale high quality aluminium windows malaysia for sale here from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.
Why SGL Aluminium Windows for Malaysia
80% Humidity, Zero Condensation
Malaysia's year-round 80% average humidity (90%+ during monsoon) causes severe condensation on non-thermal-break frames when interiors are air-conditioned. SGL thermal break frames (PA66 GF25, 24 mm zone) maintain interior surface temperature above the dew point, eliminating condensation and mould growth.
306 Stainless for Coastal Malaysia
Penang, Malacca, Port Dickson, and Kota Kinabalu face high-salinity coastal exposure. Standard 304 stainless steel rusts within 2-3 years. SGL specifies 306 marine-grade stainless steel hardware (2-3% molybdenum) as standard for coastal Malaysia orders. AAMA 2604 coastal powder coating with 3,000-hour salt spray resistance.
Northeast Monsoon Ready
Malaysia's northeast monsoon (November-March) brings sustained heavy rain to the east coast and Penang. Triple-seal EPDM system (primary compression + secondary labyrinth + tertiary fin) tested to 900 Pa water tightness. 15° sloped sill with concealed drainage and mosquito-proof mesh.
Malaysia Climate Engineering
Year-Round Humidity
Equatorial humidity causes condensation on cold frame surfaces. Thermal break frames maintain surface temperature above dew point. EPDM seals formulated for saturated air conditions without degradation.
80%+
Annual Rainfall
Northeast monsoon (Nov-Mar) brings sustained downpours to east coast. Triple-seal system (900 Pa) with pressure-equalising drainage. Wind-driven rain during tropical storms handled by tertiary fin seal.
2,500mm
Strait of Malacca Salinity
Penang, Malacca, Port Dickson face high salinity. 306 marine-grade stainless steel hardware resists chloride corrosion. AAMA 2604 coastal powder coating with 3,000-hour NSS resistance.
306 SS
Equatorial Temperature
Sustained high temperatures year-round. Thermal break + Low-E solar control glass reduces heat gain by 60%. Direct electricity savings on air conditioning in a high-tariff market.
32-35°C
Built for Malaysia's Equatorial Reality
Malaysia's climate is not merely hot - it is equatorial, meaning high temperature, high humidity, and high rainfall occur simultaneously year-round with minimal seasonal variation. European-designed windows fail here because they are optimised for cold, dry winters and mild, wet summers. SGL windows for Malaysia are engineered from the ground up for equatorial conditions.
The condensation problem is the most commonly overlooked issue. When a Kuala Lumpur office building air-conditions its interior to 22°C while outdoor air sits at 30°C and 85% relative humidity, the dew point is 27°C. A non-thermal-break aluminium frame with an interior surface temperature of 25°C will experience continuous condensation - leading to water damage, mould growth, and indoor air quality problems. SGL's thermal break frames maintain the interior surface above 27°C, eliminating condensation entirely. This is not a comfort feature - it is a building durability requirement in Malaysia.
Islamic Architectural Integration
Malaysia's architectural identity blends modern development with Islamic and traditional Malay elements. SGL supports this through bespoke manufacturing capabilities. Our CNC roll-bending produces arched window heads matching mosque and cultural centre designs. Laser-cut aluminium geometric screens provide solar shading while maintaining privacy - a functional interpretation of traditional mashrabiya. These screens can be integrated into fixed panels above operable casement sashes, or manufactured as standalone shading elements.
For heritage restoration projects in George Town (Penang UNESCO World Heritage Site) and Malacca City, SGL manufactures like-for-like replacements of original steel or timber windows with modern thermal break aluminium. We survey existing openings, produce 3D CAD models, and replicate original profiles including decorative mouldings and glazing bar patterns.
Key Features
Ideal Applications in Malaysia
-
KLCC-Area Condominiums
-
Penang Beachfront Villas
-
Johor Bahru Industrial Parks
-
Putrajaya Government Buildings
-
Malacca Heritage Restoration
-
Kota Kinabalu Resorts
-
Mosques & Islamic Centres
-
Iskandar Malaysia Developments
our aluminum window Application
our factory
Client Visit
Frequently Asked Questions
Q: Do your aluminium windows comply with Malaysian Standards?
A: Yes. SGL aluminium windows are manufactured to comply with MS 1017 (Specification for aluminium alloy windows) and MS 1135 (Code of practice for energy efficiency in non-residential buildings). Our frames use 6063-T6 aluminium alloy as specified in MS 1017, with minimum wall thickness of 1.4 mm for main profiles and 1.2 mm for glazing beads. We provide MS compliance certificates and material test reports with every shipment to Malaysia.
Q: How do your windows perform in Malaysia's high humidity?
A: Malaysia's average relative humidity is 80% year-round, reaching 90%+ during the monsoon. Standard aluminium frames without thermal breaks experience internal surface condensation when indoor air conditioning creates a temperature differential. SGL thermal break frames (PA66 GF25, 24 mm zone) maintain the interior frame surface above the dew point, eliminating condensation. The EPDM seals are formulated for tropical humidity and do not degrade or lose elasticity in saturated air conditions.
Q: What is the best window specification for coastal Penang or Malacca?
A: For coastal properties in Penang, Malacca, Port Dickson, and Kota Kinabalu, we recommend: (1) 316 marine-grade stainless steel hardware as standard - the Malacca Strait has high salinity and 304 stainless develops rust within 2-3 years; (2) AAMA 2604 coastal powder coating with 3,000-hour salt spray resistance; (3) Triple-seal EPDM system for wind-driven rain during the northeast monsoon (November-March); (4) Thermal break frames to prevent condensation on air-conditioned interiors facing humid sea air.
Q: Can you supply windows with Islamic architectural features?
A: Yes. SGL manufactures aluminium windows with Islamic geometric patterns, arched tops, and mashrabiya-style screening for mosques, Islamic cultural centres, and residential projects requiring traditional Malay or Islamic architectural elements. Our CNC bending capability produces segmental and pointed arches. Decorative aluminium lattice screens can be integrated into fixed window panels or as standalone shading elements. Custom geometric grille patterns are laser-cut to client designs.
Q: What is the shipping time to Malaysia?
A: Sea freight from our factory to Port Klang (Kuala Lumpur) takes 10-14 days. To Penang Port: 12-16 days. To Johor Port (Pasir Gudang): 10-14 days. Customs clearance in Malaysia typically requires 3-5 working days. SGL provides complete export documentation including commercial invoice, packing list, bill of lading, certificate of origin, and MS compliance certificates. DDP delivery to project site available throughout Peninsular Malaysia and East Malaysia (Sabah/Sarawak via Kota Kinabalu/Kuching).
Project Case Studies
We provide one-stop door and window solutions for individual buyers, contractors, renovation companies, and more.
Our address
No. 2 Group, Fumiao Village, Laojun Town, Hantai District, Hanzhong City, Shaanxi Province, China
Phone Number
+86 13335450021
sgl-factory@sgl-doors-windows.com
Hot Tags: aluminium windows malaysia, China aluminium windows malaysia manufacturers, suppliers, factory
| Parameter | Specification |
|---|---|
| Frame Profile | 60 mm or 70 mm thermal break aluminium |
| Aluminium Alloy | 6063-T6 (per MS 1017) |
| Frame Wall Thickness | ≥1.4 mm (main profiles); ≥1.2 mm (glazing beads) |
| Thermal Break | PA66 GF25 polyamide, 24–34 mm zone |
| Glass (Standard) | 5+12A+5 Low-E argon |
| Glass (Solar Control) | 6+12A+6 Low-E with solar control (SHGC 0.25-0.35) |
| U-Value | 1.4–1.6 W/m²K (double); 1.0–1.2 W/m²K (triple) |
| Air Tightness | Class 4 (EN 12207 / MS 1017) |
| Water Tightness | Class E900 (EN 12208) |
| Wind Resistance | Class C5 / 3,000 Pa (EN 12210) |
| Seal System | Triple EPDM: compression + labyrinth + fin |
| Hardware (Inland) | 304 stainless steel |
| Hardware (Coastal) | 316 marine-grade stainless steel (standard) |
| Surface Finish | AAMA 2604 super-durable powder coat |
| Termite Resistance | 100% (no organic material) |
| Compliance | MS 1017, MS 1135, EN 12207/12208/12210 |
| Shipping Port | Port Klang: 10-14 days; Penang: 12-16 days; Johor: 10-14 days |
You Might Also Like
Send Inquiry