Aluminium Window Frame Depth Guide: 60mm to 80mm Explained
At SGL Doors & Windows, we have manufactured aluminium window systems for 19 years at our 9000m² facility in Shaanxi. One of the most common requests we receive from architects and contractors is an explanation of frame "thickness" - specifically the 60mm to 80mm range they see in product specifications.
This measurement is actually frame profile depth (also called system depth or construction depth) - the dimension from the interior face to the exterior face of the frame. It is not the same as wall thickness, which refers to the aluminium extrusion gauge (typically 1.4–2.0mm). Both are important specifications, but this article covers frame depth only.




Understanding Frame Depth vs. Wall Thickness
The confusion between these two measurements is common, and getting it right matters when you are specifying windows for a commercial or residential project.
| Specification | What It Measures | Typical Range | Why It Matters |
|---|---|---|---|
| Frame profile depth | Overall front-to-back dimension of the frame section | 60–80mm (residential); up to 100mm (commercial) | Determines thermal break capacity, structural rigidity, and glazing cavity width |
| Wall thickness | Gauge of the aluminium extrusion walls | 1.4–2.0mm (standard); up to 3.0mm (structural) | Affects frame strength, screw-hold capability, and resistance to deformation |
When a product is described as a "65mm system" or "70mm system"-as with Schüco AWS 65 or WICLINE 65-the number refers to the frame profile depth. The BS 4873:2016 specification for aluminium alloy windows provides the standard classification framework for these dimensions.
Factors That Influence the Right Frame Depth
Selecting the correct frame depth depends on the project requirements. Four factors drive the decision.
Climate and Weather Exposure
Frame depth directly affects the thermal envelope of the building. Deeper frames accommodate wider thermal breaks and thicker glazing units. In temperate climates such as the UK and Western Europe, a 60–65mm frame depth is typically sufficient when paired with double glazing. In extreme climates-high wind zones, desert heat, or severe cold-70mm or deeper profiles provide better insulation and structural margin.
Windows installed in coastal or high-exposure locations also benefit from deeper frames. The BS 6375 weather performance classification for windows grades air permeability, water tightness, and wind load resistance - criteria that become easier to meet with a deeper, more rigid frame section.
Window Size and Configuration
Larger sash weights and wider openings place greater stress on the frame. A 60mm profile may be adequate for a standard casement window up to 1.2m wide, but a 1.8m tilt-and-turn or a full-height fixed light typically requires a 70–75mm profile to maintain stiffness without excessive deflection. Multi-point locking hardware also integrates more securely into deeper frame sections.
Thermal Performance Requirements
Frame depth determines how much space is available for the thermal break. Deeper profiles can accommodate wider polyamide break strips, which reduce thermal bridging more effectively. A 65mm frame with a 24mm thermal break achieves a lower overall U-value than the same glazing in a 60mm frame with a 14mm break.
EN 14351-1:2016 performance characteristics for windows and doors defines the testing and classification methods for thermal transmittance (U-value), air permeability, and other key performance metrics that are directly influenced by frame depth selection.
Security Standards
Building regulations in many markets now mandate minimum security performance for accessible windows. In the UK, Secured by Design accreditation and PAS 24 security testing set the benchmark. Deeper frame sections allow for reinforced shoot-bolt mechanisms, hinge-side security studs, and deeper engagement of locking points - all of which contribute to a higher security rating.
Frame Depth Comparison by Application
| Application | Recommended Frame Depth | Typical Glazing | U-Value Range (Whole Window) |
|---|---|---|---|
| Standard residential casement | 60–65mm | Double glazing (24–28mm unit) | 1.4–1.8 W/m²K |
| Mid-range residential / apartment | 65–70mm | Double glazing with Low-E argon (28–32mm unit) | 1.2–1.5 W/m²K |
| High-end residential / passive | 70–75mm | Triple glazing (36–48mm unit) | 0.8–1.2 W/m²K |
| Commercial curtain wall / storefront | 75–100mm | Double or triple glazing with structural silicone | 0.7–1.4 W/m²K |
The energy performance of the complete window assembly depends on the combination of frame depth, glazing specification, and spacer technology. For projects governed by UK Building Regulations Part L (conservation of fuel and power), the target U-value for the whole window determines which frame-depth and glazing combination is acceptable.


SGL Product Range - Frame Depths
Our standard production range covers the most commonly specified frame depths:
65mm Systems - Suited to residential and light commercial applications. Our reversible aluminium casement windows are built on a 65mm profile, offering a practical balance of thermal performance and material efficiency. These use a 24mm polyamide thermal break and accept double glazing units up to 32mm.
70mm Systems - Designed for projects requiring higher thermal performance without moving to a triple-glazed solution. Our double glazed casement windows with Low-E argon fill (5+20A+5) use a 70mm profile. The additional frame depth accommodates a wider thermal break and deeper glazing pocket, improving the whole-window U-value.
75mm Systems - Specified for larger openings and enhanced thermal performance. Our European-style aluminium tilt and turn windows are built on a 75mm profile. The depth provides the structural stiffness needed for large-sash tilt-and-turn operation and supports double or triple glazing configurations.
How to Choose the Right Frame Depth for Your Project
- Check the target U-value - Your project's energy performance specification, whether driven by Building Regulations Part L or a voluntary standard such as Passivhaus, will set the maximum allowed whole-window U-value. Work backwards from this figure to determine the required frame depth and glazing combination.
- Assess the exposure level - Buildings in exposed coastal, high-wind, or extreme-temperature locations benefit from a deeper profile as a safety margin, even if the calculated U-value target could be met with a shallower frame.
- Consider the opening size and type - Tilt-and-turn, large casement, and sliding configurations each impose different structural demands. Consult the manufacturer's span-and-load tables before finalising the frame depth.
- Verify compliance with local standards - Depending on the project location, BS 4873, EN 14351-1, or equivalent local standards will define minimum performance requirements. Frame depth selection should aim to exceed these minimums, not just meet them.
FAQ
Q: What Is The Difference Between Frame Depth And Wall Thickness In Aluminium Windows?
A: Frame depth (60–80mm) is the overall dimension from the inside face to the outside face of the frame. Wall thickness (1.4–2.0mm) is the gauge of the aluminium extrusion walls themselves. Both specifications are important, but they describe different aspects of the window profile.
Q: Is A Deeper Frame Always Better?
A: Not necessarily. A deeper frame can accommodate wider thermal breaks and thicker glazing, improving thermal and structural performance. However, deeper profiles use more material and increase cost. The optimal depth matches the project's performance requirements without over-specifying.
Q: What Frame Depth Do I Need For Double Glazing?
A: Most double glazing units (24–32mm overall thickness) fit within a 65–70mm frame profile. For triple glazing or thicker acoustic glazing, a 75mm or deeper profile is recommended.
Q: Can I Replace An Existing Window With A Different Frame Depth?
A: Yes, but the frame depth must be compatible with the wall construction and the fixing method. Deeper frames may require different cavity closers or reveals. A site survey by the installer is recommended before finalising the specification.
Q: What Frame Depth Is Required For UK Building Regulations Part L?
A: Part L sets maximum U-value targets for replacement and new-build windows rather than specifying a minimum frame depth. However, achieving the 1.6 W/m²K target for replacement windows or the 1.4 W/m²K target for new-build typically requires a profile depth of at least 65mm with double glazing and a thermal break.
Q: How Do I Verify The Frame Depth Of A Window Product?
A: The frame depth should be stated in the product specification sheet along with the U-value, air permeability class, and test certifications. The technical data sheet from the manufacturer - tested to EN 14351-1 or BS 6375 - is the authoritative source
Conclusion
Frame profile depth is one of the fundamental specifications in aluminium window selection. It directly affects thermal performance, structural capacity, weather resistance, and security compliance. Understanding the difference between frame depth and wall thickness - and knowing which projects require a 60mm, 70mm, or 75mm profile - helps architects and contractors make confident specification decisions.
If you need frame depth recommendations for a specific project, including U-value calculations and compliance checks, contact our technical team. We routinely work with specifiers across the UK, Europe, and international markets and can provide project-specific data within 48 hours.






